安阳陪游女

三明附近想过夜电话联系

Pneumatic PP ball valve

  • [valve model]: Q611S
  • [diameter specification]: DN15~DN100
  • [structural form]: Floating through
  • [valve body material]: UPVC、CPVC、PP、PVDF
  • [nominal pressure]: PN10,PN16
  • [applicable temperature]: -10℃-85℃
  • [application scope]: Acid base, food chemical solution, corrosive chemical liquid
Consult manufacturer Online Message
  •  Pneumatic PP ball valve

Product features

Pneumatic PP ball valve (plastic ball valve) is a kind of chemical special ball valve with strong corrosion resistance. The valve body is made of polypropylene PP material, which has good corrosion resistance and sealing property. It is the key device to control the flow of corrosive medium in chemical pipeline. The pneumatic PP ball valve adopts the connection mode of Double Union, and the ball valve body is light in weight, and has the characteristics of simple installation and convenient disassembly. The pneumatic PP ball valve should not be used in the pipeline with hard particle liquid to prevent scratching the ball surface or sealing surface. The working temperature is - 10 ℃ - 85 ℃.
 
Features of pneumatic PP ball valve:
 
1. Pneumatic union ball valve integral ball valve has less leakage points and high strength, and the connection form is especially convenient for ball valve assembly and disassembly or installation;
2. The material of pneumatic PP ball valve body is sanitary, non-toxic, strong corrosion resistance, light weight and wide application range, which is commonly used in corrosion-resistant occasions;
3. This product is light in weight, compact and beautiful in structure, wear-resistant, easy to disassemble, easy to maintain, with certain rigidity and strength;
4. It has good impact resistance, various corrosion media, acid and alkali resistance, long-term use of General inorganic acid, alkali, salt, gas, water and other corrosive fluids below 85 ℃.

technical parameter

Nominal diameter DN15~DN100(mm)
Pressure range 1.0mpa-1.6mpa
Connection mode Double order live connection Flange type
working temperature -10℃-85℃
body material UPVC 、CPVC、PP、PVDF
sealing material
PTFE
Installation position No requirement (horizontal installation recommended for extended service life)
Applicable media Acid base, food chemical solution, corrosive chemical liquid
control mode Switch type (two position control) , regulating type (4-20mA signal precise regulation)

Pneumatic PP ball valve actuator:
 
Ventilation off, double air supply on
Single acting normally closed type: ventilation on and off, air source failure closing
Single acting normally open type: ventilation off, air cut on, air source fault on
Optional accessories: reversing solenoid valve, limit switch, air filter pressure reducing valve, electric positioner, hand wheel mechanism, and retaining valve
Additional functions: optional explosion-proof and manual device (open and close the valve manually in case of failure)

Quotation process

Valve price:

Due to the different requirements of order quantity, packaging and delivery mode, as well as the fluctuation of valve raw material price, the valve price will be greatly different. Therefore, the price of our products is not indicated on the website. Please understand.

If you select a valve product on this website, if you need to know the price or ask for relevant technical information, please contact us. We will reply immediately, and according to your requirements, we can select the right valve products for you, so that your purchasing process is easy and pleasant.

Quotation process:

1. Please fax the name (or product model) of the valve you selected, the required order quantity, packing requirements, delivery time, your company name, location and contact information of your company to 021-36311208 Or telephone number: 021-60547555。

2. After receiving the customer's purchase list, our company will provide customers with valve quotation "price list", model selection "valve model" and technical guidance as soon as possible.

3. Specific matters to be agreed: delivery time, special requirements, etc.

Ordering instructions

1、 If the customer has special requirements for the product, the following instructions shall be provided in the order contract:
(1) Valve body material (such as: plastic, cast steel, stainless steel...)
(2) Connection type (e.g. flange, thread, clamp...)
(3) Nominal diameter, pipe size
(4) Ambient temperature and pressure range
(5) Supply voltage, air pressure
(6) Fluid properties (including nominal pressure, temperature, viscosity or acidity or alkalinity)
2、 The company configures all kinds of driving devices according to the special requirements of customers. (electric control, pneumatic control)
3、 If the customer provides the determined valve type and model, the customer shall correctly explain the meaning and requirements of the valve model (for details, refer to the description of valve model preparation), and sign the contract under the condition that both parties understand and agree.
4、 After the customer tells the required valve model, specification, quantity and delivery time and place, 20% of the total amount of deposit or full payment shall be timely remitted to our company's account, and the rest shall be remitted before delivery, so as to arrange delivery in time.
5、 After confirming the purchase, our company carries on the production in strict accordance with the delivery date. According to the different types and quantities of orders, the product processing cycle is generally 3 to 30 days, and the specific delivery time is subject to the contract. In order to ensure that the goods you ordered are in place in time, please order as early as possible.
6、 According to the needs of customers, our company provides network distribution services, delivering goods to the branches (offices) in major cities, and providing door-to-door delivery service. After the product acceptance, our company will provide after-sales service.